|
|
| |
|
|
|
|

|

|
Click to enlarge image
|
Model Number |
As per the Requirement |
PLASMA-ARC-FLOW�TOTAL RECYCLERS.
They have been conceived and developed by Prof. Santilli for the complete elimination of unwanted liquid wastes, such as automotive antifreeze and oil waste, cooking oil waste, industrial, agricultural and marine liquid wastes, etc., as well as for the processing of crude oil into the clean burning magnegas� A submerged electric arc between carbonaceous electrodes decomposes the molecules of the liquid feedstock into their atoms, ionizes the latter and forms a plasma at about 10,000 degrees F of mostly ionized H, C, O and other atoms. The PlasmaArcFlow�moves said plasma away from the arc and controls the subsequent chemical reactions. By continuously recirculating the liquid through the arc, PlasmaArcFlow�Recyclers completely eliminate the liquid waste and transform it into:
(1) Clean burning magnegas�that bubbles to the surface where it is collected and then subjected to various purification processes;
(2) Carbonaceous solids that precipitate at the bottom of the recyclers where they are periodically removed and used for the production of electrodesor as sythetic coal; and
(3) Large amount of heat originating from the highly esoenergetic reactions for the formation of magnegas�(such as the formation of CO that releases essentially the same heat as that from burning coal). This heat is acquired by the liquid feedstock and can be used via a heat exchanger for heating up buildings, partial self-generation of DC electricity of the arc via a steam turbine, desalting seawater via evaporation, and other applications.
Santilli Total Recyclers are environmentally very friendly because: they eliminate unwanted liquid wastes; they produce a combustible gas with clean exhaust (see Section 8 below); all their operations are internal and release nothing into the environment; and they cause no noise pollution since their sole noise is that of ordinary pumps and AC-DC converters.
Also, the use of ordinary coal for the production of electrodes enhances the energy content of magnegas�and has other advantages. The great affinity of oxygen and carbon prevents other elements (such as sulphur) from participating in the synthesis of the gas, and precipitate as solids. Therefore, PlasmaArcFlow�Recyclers also constitute a new method for the gasification of coal into a clean burning fuel.
|
|
|
|
| |
|
|
|